DR5088RC nemám, nemohu vyzkoušet.
Tato destička https://sites.google.com/site/sidloweb/elektrika/32-ard-ln-s88 se chová normálně.
Moderátoři: Michal Dalecký, Jarda H., Rudolf
Set loco in slot 1 direction Forward F0=Off F1=Off F2=Off F3=Off F4=Off.
Set speed of loco in slot 1 to 12.
Set speed of loco in slot 1 to 14.
Set speed of loco in slot 1 to 13.
Set speed of loco in slot 1 to 17.
Set speed of loco in slot 1 to 18.
Set speed of loco in slot 1 to 19.
Sensor LS2 () is High. (BDL16 # 1, DS2; DS54/DS64/SE8c # 1, SwiA/S1/DS02).
Transponder address 13 (short) present at LR2 () (BXP88 Board ID 1 section 2 or the BXPA1 Board ID 2 section).
Sensor LS1 () is Low. (BDL16 # 1, DS1; DS54/DS64/SE8c # 1, AuxA/A1/DS01).
Transponder address 13 (short) absent at LR1 () (BDL16x Board ID 1 RX4 zone A or BXP88 Board ID 1 section 1 or the BXPA1 Board ID 1 section).
Set speed of loco in slot 1 to 17.
Set speed of loco in slot 1 to 16.
Set speed of loco in slot 1 to 17.
Set speed of loco in slot 1 to 6.
Set speed of loco in slot 1 to 0.
Set speed of loco in slot 1 to 0.
Set speed of loco in slot 1 to 30.
Set loco in slot 1 direction Reverse F0=Off F1=Off F2=Off F3=Off F4=Off.
Set speed of loco in slot 1 to 31.
Set speed of loco in slot 1 to 32.
Set speed of loco in slot 1 to 31.
Sensor LS1 () is High. (BDL16 # 1, DS1; DS54/DS64/SE8c # 1, AuxA/A1/DS01).
Transponder address 13 (short) present at LR1 () (BDL16x Board ID 1 RX4 zone A or BXP88 Board ID 1 section 1 or the BXPA1 Board ID 1 section).
Transponder address 13 (short) absent at LR2 () (BXP88 Board ID 1 section 2 or the BXPA1 Board ID 2 section).
Sensor LS2 () is Low. (BDL16 # 1, DS2; DS54/DS64/SE8c # 1, SwiA/S1/DS02).
Set speed of loco in slot 1 to 28.
Set speed of loco in slot 1 to 18.
rostikator píše:ten ToM nemizne ani když nesvítí
nastaveni projedu odpoledne v dílně (ale nastavení čeho, v JMRI) když to jde přes USB a přes NET to nejde korektně. Předpokládám že USB / NET je jen transportní vrstva něčeho co se do centrály dostane a ta to nějak zpřístupňuje dál
Uživatelé procházející toto fórum: Žádní registrovaní uživatelé a 48 návštevníků